The Garage
- tintin
- Rank: Senior
- Location: In my own little world
Post
Well I ended up ditching the Jet performance chip as it is a waste of money apparently! I did however install my IRO lift kit, but didn't get the brake lines as they are not necessary at 3.5" of lift when not disconnecting the sway bar links. I also held off on the rear track bar as the bracket is sufficient for the wheeling we do here. The kit is extremely sturdy and makes the Bulldog stand tall and proud unlike before when it looked like a macho station wagon!
Well now that all of this is fitted I still have to swap the crappy CV joint fromt Dana 30 axle shafts for the u-joints I bought but have to wait for a special ratchet head to come in for that. After I have done this I will be scouting shops to get some sliders built and have a custom recovery section made for the front as I am not pleased with the stock set up breaking on me the other day!!! Anyway, on to the next one eh!
Well now that all of this is fitted I still have to swap the crappy CV joint fromt Dana 30 axle shafts for the u-joints I bought but have to wait for a special ratchet head to come in for that. After I have done this I will be scouting shops to get some sliders built and have a custom recovery section made for the front as I am not pleased with the stock set up breaking on me the other day!!! Anyway, on to the next one eh!
--
tintin
tintin
- tintin
- Rank: Senior
- Location: In my own little world
Post
Wow, so nobody modifies they rigs anymore? Well I just picked up a set of JK ris in 17" with a set of 32" goodyear wranglers fro a very very good deal. Had to order some bolt pattern adapters from http://www.ezaccessory.com/default.asp so I can fit the 5x5" bolt pattern wheels onto my 5x4.5" bolt pattern hubs.They will look very nice once fitted, and I hope that will be this week. I'll post some pics once I get them on.
--
tintin
tintin
-
Ri
- Rank: Junior
Post
I do: http://www.uaeoffroaders.com/forum/show ... -4L-Laredotintin wrote:Wow, so nobody modifies they rigs anymore?
- nicolas243
- Rank: Offroader
Post
Hello,
I am looking for a garage to fix my Jeep Cherokee 1996 in Abu Dhabi.
Western motors doesn't want to take it for a reason unknown. May be because the car is too old...
Please help me!
Nicolas
056 12 965 72
I am looking for a garage to fix my Jeep Cherokee 1996 in Abu Dhabi.
Western motors doesn't want to take it for a reason unknown. May be because the car is too old...
Please help me!
Nicolas
056 12 965 72
- JC
- Founder
- Rank: Expert
- Location: Abu Dhabi, United Arab Emirates, United Arab Emirates
Post
nicolas243 wrote:Hello,
I am looking for a garage to fix my Jeep Cherokee 1996 in Abu Dhabi.
Western motors doesn't want to take it for a reason unknown. May be because the car is too old...
Please help me!
What's the problem Nicolas
Nicolas
056 12 965 72
-
Ri
- Rank: Junior
Post
3.7L Powertech according to wikipedia http://en.wikipedia.org/wiki/Jeep_LibertyMosalf wrote:Can someone confirm if the 2012 Cherokee has the pentastar engine as well?
- Abdul Qadir
- Rank: Junior
- Location: Abu Dhabi
Post
What is the problem actually, there are many good work shops in mussafahnicolas243 wrote:Hello,
I am looking for a garage to fix my Jeep Cherokee 1996 in Abu Dhabi.
Western motors doesn't want to take it for a reason unknown. May be because the car is too old...
Please help me!
Nicolas
056 12 965 72
--
Abdul Qadir
Abdul Qadir
- tintin
- Rank: Senior
- Location: In my own little world
Post
What's the problem Nicolas, maybe we can help?
nicolas243 wrote:Hello,
I am looking for a garage to fix my Jeep Cherokee 1996 in Abu Dhabi.
Western motors doesn't want to take it for a reason unknown. May be because the car is too old...
Please help me!
Nicolas
056 12 965 72
--
tintin
tintin
Return to “General 4X4 and Off-Road”
Who is online
Users browsing this forum: No registered users and 4 guests